Flex Travel Charger · Europe

Adapt your connection. Keep your routine.

Flex pairs a portable control box with robust overmolded Flex-Link connections. Its dedicated 0.2 m adapters connect to supported domestic and CEE supplies. Smart Amp-Sync identifies the adapter and automatically selects the allowed current.

A good fit for

Drivers who want one charger for several verified European outlets, with the correct adapter for each location.

Full specifications ↓Ask a product question ↗

MORE THAN A NUMBER ON THE BOX.

What it means
for your everyday.

Purpose-built Flex-Link connections

Overmolded connectors and short adapter leads are designed for repeated use. Flex-Link and Omni-Connect are different systems; select the family that matches your charger.

Automatic current matching

Smart Amp-Sync reads the adapter type, so the current setting follows the permitted connection rather than a guess.

Domestic adapters get their own limits

The catalog lists reduced operating current for Schuko, UK, Italian, Swiss and Danish options, with thermal monitoring on the specified domestic adapters.

Built around portable use

A TPU cable, overmolded connector housings and component-specific weather-resistance ratings support a practical travel kit.

CHOOSE THE VERSION THAT FITS.

One family. Clear differences.

Model-by-model comparison
Reference model	Power / role	Current	Phases	Connection / communication
M2-7T	7.36 kW	32 A	1	Flex-Link Configuration dependent
M2-11T	11.04 kW	16 A	3	Flex-Link Configuration dependent
M2-22T	22.08 kW	32 A	3	Flex-Link Configuration dependent

THE COMPLETE PICTURE.

Specifications you can compare.

Shared specifications
Specification	Detail
Vehicle connection	IEC Type 2
Operating temperature	−25°C to +45°C
Altitude	Up to 2,000 m
Residual-current protection	AC 30 mA + DC 6 mA leakage protection
Controls	A key: current · C key: delay · LCD status display
Storage	−40°C to +85°C · ≤95% RH
Control box	IP66
Modular connector	IP65
EV connector	IP54
Cable jacket	TPU
Adapter recognition	Smart Amp-Sync automatic current setting
Supply frequency	50 Hz

Cable by configuration
Model	Cable conductor	Outside diameter
M2-7T	6.0 mm² × 3 cores	13.2 mm
M2-11T	2.5 mm² × 5 cores	13.2 mm
M2-22T	6.0 mm² × 5 cores	16.2 mm

Data from the supplied September 2026 engineering catalog, page(s) 20–21. Actual charging power is limited by the vehicle, charger, cable, adapter and available supply. Ratings refer to the listed component and operating conditions. Final SKU documents govern installation and regional approvals.

MAKE EVERY CONNECTION COUNT.

Flex-Link · Europe

Explore this adapter system ↗

Dedicated 0.2 m Flex-Link adapter leads. These use the AS1 family and are separate from Omni-Connect. Confirm the allowed output with the exact charger and supply.

Adapter model	Power connection	Operating current	Lead length
AS1-32A3P	CEE 32 A · 3 phase	32 A	0.2 m
AS1-16A3P	CEE 16 A · 3 phase	16 A	0.2 m
AS1-32A1P	CEE 32 A · 1 phase	32 A	0.2 m
AS1-16A1P	CEE 16 A · 1 phase	16 A	0.2 m
AS1-SK13A	Schuko	13 A	0.2 m
AS1-UK10A	UK	10 A	0.2 m
AS1-IT10A	Italian	10 A	0.2 m
AS1-CH8A	Swiss	8 A	0.2 m
AS1-DM6A	Danish	6 A	0.2 m

Catalog reference: 20–21. Final bundle contents and local approvals vary; use only the exact approved combination.

CHOOSE THE RIGHT CONNECTED EXPERIENCE.

Hardware first.
Features that fit.

The Flex catalog pages focus on hardware and adapters. Do not assume that every Flex SKU has MiniApp, Solar Only or DLB; verify its connectivity and enabled functions.

Explore smart energy features ↗